HPE System Insight Manager (HPE SIM) Integration Kit
==================================================
Version 1.7

The HPE SIM Integration Kit is a small set of scripts to aid with the 
integration of PRIMERGY servers into an HPE System Insight Manager 
environment.

The Integration Kit contains the following files:

- iRMC-simintegration-disable.xml
- iRMC-simintegration-enable.xml
- svtosim-domibs.bat
- svtosim-getinfo.vbs
- svtosim-loadmibs.bat
- svtosim-single.bat
- svtosim-single-remove.bat
- svtosim-unloadmibs.bat

Please refer to the 'Integrating PRIMERGY Servers into
HP Systems Insight Manager' Whitepaper for their use.


Supported software versions
---------------------------
HPE-SIM: V6.0 - V7.6
SVOM: V6.x, V7.x
SV Agents: Should match SVOM version


Limitations and Caveats
-----------------------
- Inconsistencies with formatting the system's UUID can break HP-SIM's
  automatic assignment of iRMC to it's system.
  If this is the case check for the newest iRMC firmware and system BIOS
  versions for the affected Primergy system.
  Required minimum iRMC firmware versions:
  - iRMC S1: no fix available
  - iRMC S2: 5.59A
  - iRMC S3: 6.27A
  - iRMC S4: any. HP-SIM version at least V7.4.
  - iRMC S5: any.

- When using a system's Custom management page link to open
  ServerView Operations Manager for this system it is necessary to accept
  Fujitsu's Certificate and permanently trust the Java applets from
  Fujitsu Technology Solutions.
  If ServerView Operations Manager cannot be started from HP-SIM (empty page
  with error icon in status bar), open SV Operations Manager directly once on
  the server it was installed on. After that ServerView Operations Manager
  can be started out of HP-SIM.

- ServerView Operations Manager V6.20 should not be used for HP-SIM integration
  as there is a problem with the SVOM call that HP-SIM generates for the Custom
  Mangement Page. Please use either a newer or an older version of 
  ServerView Operations Manager.

- Remote System Monitor can only be used with ServerView Agents V7.01 and later


Supported Systems
-----------------
- all PRIMERGY Systems
- BX400/BX600/BX800 MMBs
- PRIMEQUEST 1800/2800/3800 MMBs